Choosing an inspection for a let commercial property

Start with the areas served by each gas appliance

The right inspection depends on how the property is used and what its gas equipment serves. A workplace appliance, a boiler supplying a rented flat, a catering kitchen and an LPG installation can need different checks and records.

Use this guide’s tables to separate those requirements before asking for a quote. Landlords and managing agents can send a property brief below or use the landlord inspection service for booking information.

Ask about the inspection your property needs

Use “How can we help?” for the postcode, each use of the building, natural gas or LPG, appliances and the areas they serve. Mention accommodation, shared equipment, known defects, access limits and the paperwork requested. There is no upload field; ask how to share existing records. An enquiry does not confirm an appointment or inspection outcome.

Please see our Privacy and cookies policy for details of how we handle information sent through this form.

The direct answer

There is no single gas certificate for every commercial landlord

Workplace-only gas equipment

Workplace maintenance duties

HSE says landlord gas-safety duties under Regulation 36 do not apply to appliances or installation pipework used exclusively in a non-residential part. Workplace and general health-and-safety maintenance duties can still apply.

Residential or guest accommodation

Annual landlord checks can apply

Relevant appliances and flues provided for tenants, residents or guests can require annual checks and records. A boiler in a non-domestic area can remain relevant if it also serves residential accommodation.

Catering equipment

Use a catering-specific scope

For ordinary catering workplaces, check the relevant catering, fuel and appliance categories. A CP42-style inspection record concerns catering equipment; agree the kitchen and appliance scope rather than treating it as a building-wide landlord certificate.

Commercial boilers, plant or LPG

Match the fuel and equipment categories

The record and engineer must match the actual boilers, plant, pipework, flues and controls. LPG also requires the supply, cylinders or tank, regulators and vapour pipework to be declared.

Use this guide to prepare an inspection brief

Work through the building uses and equipment below, then take the resulting list to the commercial landlord inspection service to arrange access, a quotation and the appropriate records. The legal references here concern Great Britain; requirements elsewhere must be checked separately.

Choose the inspection route

Match the premises and equipment before naming the record

Inspection routes by premises and equipment
Property or equipment Likely starting point Important scope Do not assume
Shop, office or warehouse with gas used only in the workplace Workplace gas maintenance and an inspection or service record appropriate to the equipment. Boiler, heater or plant categories; pipework, flue, ventilation, controls and the dutyholder’s maintenance plan. That Regulation 36 creates an annual landlord record for every non-residential appliance.
Rented flat or other residential accommodation Annual landlord gas-safety check and record for relevant appliances and flues. Appliances provided for the tenant, flues, installation pipework maintenance, record provision and known defects. That a commercial lease or building name removes residential landlord duties.
Hotel, B&B, hostel or other guest/sleeping accommodation Landlord gas-safety duties can apply to appliances serving guest accommodation. Guest areas, boilers serving rooms, staff or other accommodation, and any separate catering or plant systems. That a kitchen or plant-room record alone covers accommodation duties.
Restaurant, takeaway, pub, café or commercial kitchen Commercial catering inspection and commonly requested CP42-style record. Every catering appliance, pipework, flexible connections, restraints, extraction, make-up air, ventilation and interlocks. That a landlord record or boiler-only engineer covers the cooking line.
Commercial boiler or plant room Commercial gas inspection, maintenance or service record matched to the plant. Fuel, input/rating, appliances, flues, ventilation, controls, pipework, areas served and operating conditions. That the word “commercial” is a complete engineer work category.
Bulk LPG or cylinder-fed commercial site Commercial LPG inspection with relevant appliance and supply competence. Tank or cylinders, storage, regulators, isolation, vapour pipework, buried pipework concerns and every appliance. That a natural-gas record is interchangeable or that the appliance is the whole LPG installation.
Mobile catering vehicle or trailer Mobile-catering LPG inspection and CP44-style route where appropriate. Every appliance, cylinders, regulators, hoses, restraints, ventilation, flame safety, movement and declared unit use. That a fixed-kitchen record covers a vehicle, or that a separate stall automatically follows the vehicle/trailer route.
Mixed-use building Separated or coordinated scopes for workplace, residential/guest, catering, plant and LPG systems. Which appliance serves which area, shared supplies, ownership/control and whether the engineer holds every required category. That one document title proves every duty and asset was covered.

Non-residential premises

Workplace gas safety duties still apply

Maintain the installation

Keep gas fittings safe

HSE tells employers to ensure gas pipework, appliances and flues are regularly maintained. The interval should reflect duties, equipment, use, condition, manufacturer instructions and appropriate standards.

Use relevant competence

Check the exact work categories

For work requiring Gas Safe registration, check the individual attending and their current fuel, appliance and task categories. The official licence-number check helps verify the person. Specified industrial premises have a different competent-person regime.

Define the evidence

Ask what record will be supplied

A workplace may need a maintenance, service, commissioning, safety-inspection or client-specific record. Name the recipient’s requirement and equipment rather than buying an undefined “commercial certificate”.

Control immediate risks

Act on defects and gas escapes

Known or suspected unsafe equipment should not be used. A gas escape follows the emergency route, not an ordinary certificate booking, and the supply must not be restored until the issue is dealt with by a competent person.

Residential and guest accommodation

Trace which gas fitting serves which occupied area

Step 1

List every use

Record shops, offices, kitchens, flats, guest rooms, staff accommodation, sleeping areas, communal areas and plant rooms. “Commercial property” is not enough detail.

Step 2

Map appliances to areas

Identify which boiler, heater, cooker, water heater or plant serves each use. A boiler physically located in a workplace may still serve residential or guest accommodation.

Step 3

Check ownership and provision

State who owns and provides each appliance, who occupies the area and whether the landlord, tenant, agent or contractor controls maintenance and access.

Step 4

Separate the inspection scopes

Arrange the landlord, workplace, catering, plant and LPG checks that genuinely apply. Confirm whether these will produce one coordinated set of records or distinct documents.

Example: shop with a flat above

A boiler’s position is not enough to select the check. Establish whether it supplies the flat, the shop or both, and identify other appliances separately. HSE explains that equipment in a non-domestic area can be a relevant gas fitting when it also serves residential accommodation. Workplace-only equipment has a different duty basis.

Commercial catering

A catering kitchen needs its own appliance and ventilation scope

HSE says catering gas equipment, flues, pipework and safety devices must be maintained safely and inspected by a competent person. The interval can vary with the equipment, use and manufacturer guidance; HSE describes annual inspection as a reasonable general minimum, not a universal certificate rule for every commercial property.

Commercial LPG property

Declare the LPG supply as well as the appliance list

Fuel and storage

Cylinders or bulk tank

State cylinder quantities and location or the bulk-tank arrangement. Include the supplier, known isolation and any concerns about storage, access, damage or changes.

Regulation and pipework

Regulators, valves and vapour lines

Give any known regulator and pipework details, including concerns about buried metallic LPG vapour pipework. Use existing plans or safely accessible information; do not disturb equipment to complete an enquiry.

Appliance categories

Boiler, catering, heating or specialist work

An LPG fuel qualification does not establish suitability for every appliance or supply task. Confirm the person’s competence for the work and whether the provider accepts that installation, including any separately required specialist assessment.

Stationary or mobile

Fixed building versus vehicle or trailer

A mobile catering unit has movement, cylinder, hose, restraint and ventilation considerations that differ from a fixed commercial kitchen or plant room.

Lease and control

Map responsibility asset by asset

Landlord-owned plant

What is retained?

List central boilers, landlord supplies, common pipework, flues, meters, risers and shared plant. State which occupied areas they serve and who controls access.

Tenant equipment

What has been installed or altered?

Record catering lines, heaters, production equipment, tenant pipework and any unapproved or later alterations. Ownership alone does not answer every safety or control question.

Contracts

Who arranges and records work?

Review the lease, service-charge provisions, maintenance contracts and managing-agent instructions. Practical tasks should be clear and dutyholders should cooperate where responsibilities overlap.

Evidence trail

Can you prove the full scope?

Keep appliance schedules, service records, inspection findings, safety actions, repairs, access refusals and the records supplied to relevant occupiers or recipients.

If the unresolved question is who should arrange the work, use the landlord and tenant responsibility guide. This article helps choose the inspection; that guide covers coordination, control and the evidence each party should keep.

Inspection frequency

Plan inspections around the duties and equipment

Inspection frequency starting points
Situation Frequency starting point What can change it
Relevant landlord gas fitting serving rented residential or guest accommodation Annual gas-safety check under the landlord duties. Check-date flexibility rules, new appliances, tenancy timing, access and whether the fitting is relevant to the accommodation.
Commercial catering equipment HSE says intervals vary; annual inspection is a reasonable general minimum. Manufacturer instructions, equipment type, use, condition, environment, risk assessment and industry practice.
Workplace-only boilers, heaters or plant A planned safe-maintenance interval appropriate to the equipment and applicable duties. Manufacturer instructions, risk, dutyholder arrangements, use, condition, records and specialist standards.
LPG tank, cylinders, regulators or pipework A site- and component-specific maintenance and inspection plan. Supplier arrangements, written scheme requirements where applicable, installation condition, pipework material, environment and risk assessment.

Avoid the wrong booking

Send this commercial-property gas brief first

1. Premises

Postcode and every use

Office, shop, warehouse, factory, restaurant, hotel, rented flat, staff accommodation, plant room, mobile unit or another use—include all that apply.

2. People

Tenants, guests, residents and workers

Say whether anyone lives, sleeps or stays as a guest, and which landlord, tenant, employer, agent or contractor controls each area.

3. Fuel and supply

Natural gas, LPG or both

Describe the meter, bulk tank or cylinders and any known regulator or pipework information. Have existing records or safe photographs ready; the form does not accept attachments.

4. Appliances

Every data plate and area served

List boilers, water heaters, catering equipment, heaters, laundry or specialist plant. State which areas each item heats, supplies or serves.

5. Requested result

Who wants which document?

Provide the certificate or record name used by the insurer, managing agent, local authority, client or other recipient, without assuming the label defines the scope.

6. Site conditions

Access, deadlines and known faults

Send plant-room, roof, loading, parking, permits, trading hours, extraction/interlock details, previous findings, alterations and appointment deadline.

What an inspection cannot promise in advance

The property brief allows support, competence, scope and availability to be assessed. It cannot establish a satisfactory result, include undeclared appliances or reserve a repair. Agree the accepted inspection, access, documents and quotation before attendance.

Check the completed record

The evidence should match the work that was actually done

  • Premises and responsible party: the correct site, inspected areas and person arranging the work.
  • Fuel and supply: natural gas, LPG or both, with relevant installation details where they form part of the agreed scope.
  • Appliance schedule: every inspected appliance or item of plant, its location and identifying information.
  • Checks and results: the tests, observations, safety devices, flue, ventilation, controls or other items required by the agreed scope.
  • Defects and actions: unsafe findings, isolation, warning notices, limitations, inaccessible items and recommended remedial work.
  • Person carrying out the work: the relevant business and individual’s details, date, authentication and registration details where required. Verify competence as part of arranging the work; do not expect every record to list all qualifications.
  • Next action: maintenance, repair, reinspection, record distribution or another duty-specific follow-up.

For a completed residential landlord safety check, findings and repairs are separate stages: HSE says the check record should be issued even when remedial work remains. Keep the follow-up evidence with it, act on restrictions and do not confuse an incomplete inspection with completed checks that found defects.

Treat the tables as a way to describe the required work, not a list of automatically included services. Required inspection safety checks still apply, while servicing, repairs, separately commissioned tightness testing, purging and specialist ventilation work need clear scope and cost arrangements.

Possible gas escape

Do not wait for a certificate appointment

Leave the affected area and phone from safety. Avoid flames and electrical switches. For natural gas in Great Britain call 0800 111 999; for LPG, follow the supplier’s emergency instructions. Shut off the supply only if safe and do not restore it until a competent person has dealt with the problem. Call 999 for fire or immediate danger. Do not wait for a routine enquiry reply.

Location and installation assessed together

Check availability for the inspection you need

For commercial inspections using natural gas or LPG, our coverage is:

Priority areas

London, Essex and Kent.

Other covered counties

Hertfordshire, Surrey, Buckinghamshire, Berkshire and Sussex.

Elsewhere in the UK

Considered by request, after the site and travel requirements have been reviewed.

Attendance depends on postcode, installation, access, travel and appropriately qualified engineer availability. State each building use and installation so the required work can be checked. Coverage does not confirm support for every appliance, specialist system or requested inspection.

Commercial appliance servicing has the same area hierarchy and attendance conditions, but it must be requested and agreed separately from the inspection. Repairs, installation, commissioning and specialist work require their own support and attendance assessment.

Related gas routes

Continue with the service that matches the property

Workplace boilers or plant

Commercial gas certificate

Start here for a defined inspection of commercial gas appliances, plant, pipework or related equipment.

Open the commercial gas route

Unsure who to book

Commercial gas engineer near me

Use the booking guide to match the premises, fuel, appliances, work categories, access and requested record.

Open the engineer-matching guide

Planning the quotation

Commercial gas certificate cost

See which site, fuel, appliance, access and evidence details affect a commercial gas quotation.

Open the quotation guide

Residential letting

Landlord Gas Safety Record

Use the landlord route for relevant gas appliances and flues provided for tenants in residential accommodation.

Open the landlord gas route

Official guidance and record publisher

Check the landlord and workplace distinctions at source

The legal guidance here concerns Great Britain; a Northern Ireland enquiry needs a separate check. Examples help define a property brief and do not establish support for every site or current engineer category.

Commercial landlord gas questions

Commercial landlord gas certificate FAQs

Does every commercial landlord legally need an annual gas safety certificate?
No single annual certificate rule applies to every commercial letting. HSE states that Regulation 36 landlord duties do not apply to gas equipment used exclusively in a non-residential part of premises. Other workplace, maintenance and health-and-safety duties can still apply. Annual landlord gas-safety duties can apply where gas equipment serves relevant residential, sleeping or guest accommodation.
When do annual landlord gas-safety duties apply?
They apply to relevant gas appliances and flues provided for tenants in rented residential accommodation and can also apply to guest accommodation, including hotels and B&Bs. HSE says a fitting located in a non-domestic area but also serving residential accommodation can remain a relevant gas fitting. The exact premises, equipment and control arrangements should be checked.
What applies to gas equipment used only in a non-residential unit?
HSE says the Regulation 36 landlord gas-safety check does not apply to equipment or installation pipework used exclusively in a non-residential part. That does not mean no action is required: maintenance duties under workplace and health-and-safety law can apply, and gas fittings must be maintained safely by people with the relevant competence.
Does a landlord gas-safety record cover a restaurant or catering kitchen?
A residential landlord record does not establish that a catering kitchen has been fully inspected. Agree the cooking appliances, fuel and necessary kitchen safety checks with someone qualified for that work. CP42 is a catering inspection record reference, not a substitute for accommodation checks or specialist ventilation work. A separate stall, vehicle or trailer needs its own setting and scope confirmed.
Which record applies to commercial boilers or plant?
The inspection and record should match the boiler or plant, fuel, rating, pipework, flue, controls and the engineer’s relevant work categories. A commercial gas inspection record may be appropriate for workplace plant, while a boiler also serving rented residential or guest accommodation may fall within additional landlord duties. Send the data plate and areas served before booking.
What changes when the commercial property uses LPG?
Declare LPG before attendance. The enquiry may include cylinders or a bulk tank, regulators, vapour pipework, isolation, storage and LPG appliances, and the engineer must hold the relevant fuel and appliance categories. An LPG supply or storage arrangement can require a wider safety and maintenance assessment than an appliance-only certificate request.
Can one gas record cover a mixed-use property?
Possibly, but only where the competent engineer and record genuinely cover every relevant area, appliance, fuel and duty. A shop with a flat above, a hotel with a catering kitchen or a site with boilers plus LPG equipment may need distinct inspection scopes or records. One certificate title should never be used to hide omitted equipment.
Who arranges gas maintenance under a commercial lease?
The lease, service contracts, ownership and control of each appliance and supply should be reviewed. Contract wording can allocate practical tasks, but dutyholders should cooperate and cannot assume that a clause removes every legal responsibility. Map who owns, controls, maintains and uses each asset before arranging the work.
Who can inspect commercial landlord gas equipment?
In ordinary workplaces where Gas Safe registration is required, verify the business and the individual allocated to the inspection. Check the person’s current fuel, appliance and work categories using their licence details. HSE identifies a different competent-person regime for specified industrial premises, with Gas Safe requirements for domestic, residential or sleeping-accommodation parts. Describe the actual site use before booking.
What details should I send before booking?
Use the message field for the postcode, every building use, any residential or guest accommodation, natural gas or LPG, appliances and areas served. Add shared-supply information, known defects, access limits, timing and the document requested. The form has no upload; ask how to share existing records. Sending the brief starts an assessment rather than confirming attendance or a satisfactory record.

Need the correct inspection?

Send the property uses, fuel, appliance list and areas served

Upkeepone can check whether the enquiry involves workplace equipment, residential or guest accommodation, catering, commercial boilers, LPG or several scopes before confirming availability and a quotation. A document name alone is not enough to match the work.

Possible gas escapes must follow the emergency route above.