LPG Gas Stove Safety Certificate

It is the appropriate gas-safety record for the agreed checks completed on a genuinely LPG-fired cooking stove and the stated parts of its supply. The record and scope depend on the appliance design, approved fuel and pressure, installation setting and wording requested by a venue, organiser, landlord, insurer, local authority or other dutyholder.

This page is primarily for LPG cooking stoves such as table-top, freestanding or catering burner units. An LPG space-heating stove, a wood or other solid-fuel stove and a dual-fuel heater have different appliance, flue and competence requirements. Send the complete data plate, whole-appliance photos and intended use so the enquiry can be routed correctly.

Not necessarily. A separate hob is normally installed into a worktop, while a cooker or range can combine a hob, grill and oven. The word stove is also used for portable or freestanding burner units. Send the data plate, burner layout and whole appliance so the correct category and paperwork boundary are quoted.

An enquiry can be considered, but inspection cannot turn outdoor-only equipment into an appliance approved for an enclosed setting. Send the manufacturer instructions, data plate and photos of the proposed location, enclosure, cylinders, clearances and ventilation. The appliance's intended use and actual installation must support the requested setting before a route is offered.

Not necessarily. A stove record can document the agreed checks on that appliance and supply. A mobile-catering or CP44-type request can cover the wider installation, including every declared appliance, cylinders, regulator, pipework, ventilation and unit setting. List all connected appliances and forward the exact organiser or insurer wording so the broader route can be chosen where required.

Send the full postcode and setting, stove make, model, serial and data plate, manufacturer instructions, cooking or heating purpose, LPG type and pressure, burner count, fixed, freestanding or portable arrangement, cylinder or bulk supply, regulator, hoses, pipework and isolation, current operating condition, ventilation or flueing, installation and conversion history, other appliances, access, photos and exact deadline or requester wording.

The agreed scope may include appliance identification and suitability, installation and stability, gas tightness, operating pressure, hoses and connections, isolation, ignition, burners, pan supports, flame supervision and gas controls where relevant, combustion or safe-operation checks, clearances, ventilation and the relevant accessible LPG supply. The engineer confirms the checks appropriate to the stove and setting.

It can be considered as an enquiry, but inspection is not a promise to approve unknown or unsupported equipment. Send manufacturer instructions, the complete data plate, declared LPG type and pressure, burner and conversion evidence and whole-appliance photos. Missing evidence, unsuitable components, concealed work or a self-built installation may require specialist investigation or correction.

No favourable paperwork is promised before inspection. Price depends on the postcode, stove type and permitted setting, LPG supply, other appliances, ventilation or flueing, access, operating condition, evidence, inspection scope and deadline. Appropriate paperwork can be issued for completed checks when the accessible installation and findings support it; remedial work or another visit may be required.

Regular LPG work covers London, Essex and Kent. Hertfordshire, Surrey, Buckinghamshire, Berkshire and Sussex can be considered when the right LPG trade is available. Other UK areas are considered by request after the postcode, stove type, setting, deadline and required competence are checked.